Page 163 - Engineering Rock Mass Classification_ Tunnelling, Foundations and Landslides
P. 163
Chapter 9 Rock Mass Number 131
Kaiser, P. K., Mackay, C., & Gale, A. D. (1986). Evaluation of rock classifications at B.C. Rail Tumbler
Ridge Tunnels. In Rock Mechanics and Rock Engineering (Vol. 19, pp. 205–234). New York:
Springer-Verlag.
Kumar, N. (2002). Rock mass characterisation and evaluation of supports for tunnels in Himalaya
(p. 295). Ph.D. Thesis. Uttarakhand, India: WRDM, IIT Roorkee.
Lama, R. D., & Vutukuri, V. S. (1978). Handbook on mechanical properties of rocks (Vol. 2, p. 481).
Clausthal, Germany: Trans Tech Publications.
Moreno Tallon, E. (1980). Application de Las Classificaciones Geomechnicas a Los Tuneles de Parjares,
II Cursode Sostenimientos Activosen Galeriasy Tunnels. Madrid: Foundation Gomez-Parto [referred
in Kaiser et al. (1986)].
Rutledge, J. C., & Preston, R. L. (1978). Experience with engineering classifications of rock. In Proceedings
of the International Tunnelling Symposium (pp. A3.1–A3.7). Tokyo.
Sari, D., & Pasamehmetoglu, A. G. (2004). Proposed support design, Kaletepe Tunnel, Turkey.
Engineering Geology, 72, 201–216.
Singh, B., Goel, R. K., Jethwa, J. L., & Dube, A. K. (1997). Support pressure assessment in arched
underground openings through poor rock masses. Engineering Geology, 48, 59–81.
Singh, B., Jethwa, J. L., Dube, A. K., & Singh, B. (1992). Correlation between observed support pressure
and rock mass quality. Tunnelling and Underground Space Technology, 7, 59–75.
Terzaghi, K. (1946). Rock defeats and load on tunnel supports, introduction to rock tunnelling with
steel supports (R. V. Proctor & T. C. White, Eds.). Youngstown, OH: Commercial Shearing &
Stamping Co.
Unal, E. (1983). Design guidelines and roof control standards for coal mine roofs. Ph.D. Thesis.
Pennsylvania State University [reference Bieniawski (1984)].
Wickham, G. E., Tiedmann, H. R., & Skinner, E. H. (1972). Support determination based on geologic
predictions. In Proceedings of the Rapid Excavation Tunnelling Conference (pp. 43–64). New York:
AIME.
