Page 270 - Engineering Rock Mass Classification_ Tunnelling, Foundations and Landslides

230 Engineering Rock Mass Classification

Hoek, E., & Bray, J. W. (1981). Rock slope engineering (revised 3rd ed., p. 358). The Institution of Mining
and Metallurgy. London: Maney Publishing.

Hutchinson, J. N. (1988). Morphological and geotechnical parameters of landslides in relation to
geology and hydrology, general report. In Proceedings of the 5th International Symposium on
Landslide (Vol. 1, pp. 3–35). Oxford, UK: Taylor & Francis.

IS14680. (1999). Landslide control guidelines. New Delhi: Bureau of Indian Standards.
Ishikawa, N., Takeuchi, D., & Nonaka, T. (2006). Impact behaviour of new steel check dams under debris

flow. In C. Majorana, et al. (Eds.), 3rd International Conference on Protection of Structures Against
Hazards (pp. 31–42), Venice. Singapore: CI-Premier.
Lien, H. P., & Tsai, F. U. (2000). Debris flow control by using slit dams. International Journal of Sediment
Research, 15(4), 391–409.
Schuster, R. L., & Krizek, R. J. (1978). Landslides — Analysis and control (Special Report 176, p. 234).
Washington, D.C.: National Academy of Sciences.
Singh, B., & Anbalagan, R. (1997). Evaluation of stability of dam and reservoir slopes—Mechanics of
landslide, seismic behaviour of ground and geotechnical structures. In Proceedings on Special Tech-
nical Session on Earthquake Geotechnical Engineering, XIV International Conference on Soil Mech.
and Foundation Engineering (pp. 323–339). Hamburg, Germany.
Singh, B., & Goel, R. K. (2002). Software for engineering control of landslide and tunnelling hazards
(p. 344). Rotterdam: A. A. Balkema (Swets & Zeitlinger).